Friday, August 23, 2019
Media and the phenomenon of child killers Essay
Media and the phenomenon of child killers - Essay Example The gruesome sight of the body of four-year-old Horace Millen at the beach at Dorchester Bay initially led those who had seen it to believe that it was the work of a grown man or an adult. Little did they know that such savagery was the handiwork of a boy barely out of childhood. He was sent to a reform school prior to the incident for beating up younger children and using an astounding degree of unnecessary physical force.When people began speculating about the kind of background this child might have that led him to commit such unspeakable acts of atrocity, one thing that came up was his penchant for dime novels.Sordid tales of killing and violence leapt from the pages of these dime novels, and many believe that these tales emboldened him to commit the crimes himself.From the first example of Jesse Pomeroy, recent history has had its share of child killers and child criminals. There is the Heath High School shooting where Michael Carneal, just fourteen years old, opened fire at a g roup of students praying and killed three female students while wounding five others. Two years later, in 1999, the Columbine massacre took place wherein two teenagers, Eric Harris and Dylan Klebold, killed twelve students and a teacher, and wounded twenty four others, before turning the guns on themselves and committing suicide.Just this year, on April 16, 2007, in Blacksburg, Virginia, a Korean-American by the name of Cho Seung -Hui went on a killing spree that was to become the deadliest shooting rampage in America. After the smoke had cleared, the death count was 32 bodies. Much speculation has taken place as to what might have caused children to behave in this manner. Of course, several factors came into play: mental illness, family background, a history of child abuse, teen-age social stratifications (particularly in the case of Columbine and Virginia Tech) and a host of other factors that contribute to maladjustment. However, ever since the case of Jesse Pomeroy, an accusing finger has been particularly directed towards the media. It has been said that the surfeit of violent images depicted in it that could have triggered psychological responses in the child-perpetrators. Indeed, there is no dearth of cases and examples to prove that there is a causation between media violence and violent behavior. In an article entitled "The Impact of Mass Media Violence on US Homicides", Phillips (1983, p. 560) presented "what may be the first systematic evidence suggesting that some homicides are indeed triggered by a type of mass media violence." Just a year before, he came out with another paper, with the following findings: Violent, fictional television stories trigger imitative deaths and near fatal accidents in the United States. In 19877, suicides, motor vehicle deaths and non-fatal accidents all rose immediately following soap opera suicide stories. The U.S. female suicides increased proportionally more than male suicides. Single-vehicle crashes increased more than multiple vehicle suicides.1 Several years after Phillips came out with his seminal studies, new researchers came out with evidence to support his conclusions. Cornstock2 found "a very solid relationship between viewing anti-social portrayals or violent episodes and behaving anti-socially." Even more compelling, Huesman and Erron3 published a 20-year follow up of 400 children and discovered that heavy exposure to television violence at eight years old was associated with violent crime and spouse or child abuse at age 30 and this is true for all socio-economic levels and for all levels of intelligence. More careful than her predecessors but presenting evidence equally noteworthy, Sheenan4 found that the question of the young being more vulnerable to the effect of media is a complex and difficult one to interpret precisely. The
Thursday, August 22, 2019
Network Design for the 2012 London Olympics Essay Example for Free
Network Design for the 2012 London Olympics Essay This report is a step by step analysis of the requirements planning and implementation of a network based on the infrastructure of an office environment. Throughout this report, the reader will see how the requirements planning is broken down into detailed sections to illustrate how each requirement has been identified for the stages of planning to implementation. In the first part of the report, we will be identifying what hardware is required for the scale of the network, taking into consideration a room for future expansion and devices to be added at a later date. The second part of the report will be the identification of software that will be needed to run all services on the network including set-up and configuration of the software. Network Planning Why is a network required? Before actually planning the set-up of a network, the use of a network has to be justified. There are many uses to a network, some of the basic uses are â⬠¢ Sensitive information exchange ââ¬â information is shared only between departments and/or specific users and not to other people, e. g. customer account information that contains bank information and/or other personal information. â⬠¢ Internal digital mail requests and communication between departments in a business may be increased and messages can be saved for later use. â⬠¢ Resource sharing ââ¬â information updated constantly is shared from one location and is referenced by other departments and/or users within the same network, e. g. a database of customer details and orders for a company. â⬠¢ File Backup Services ââ¬â information is backed up or stored in a secure location in the event of future problems and to maintain records of information. There are other uses of networks as well but mainly they are used as a means of security. Within a company, when a network is utilised correctly, the flow of information across a network can be monitored and tracked back to the user. This is essential to ensure no information used within the company is accessed from an outside source or is used in an unlawful manner by a company employee. Scope of the network Since the network is being made for the London 2012 Olympics, we can assume that the network will be of large scale (roughly 500-2,000 users). This means that each service, such as email and DHCP services, will require its own dedicated hardware in order for the resources to be adequately shared without any network latency or slow access experience. If the network is used on a much smaller scale, then the services could run from using only a few pieces of dedicated hardware such as the domain and email services sharing hardware. A site survey should always be performed before installation a network to ensure that wireless signals can be transmitted throughout the building or buildings and to see how the network can be modelled based on the environment it is going to be installed in. Identifying Network Hardware In this section, we will identify different hardware and its uses on a network, how a network is connected and what devices are used to connect a network throughout a company building. Servers and Services There are many different types of services that can be hosted from a server on a network. Many of these services usually have their own dedicated hardware but depending on the scale of the network, the services can easily be bunched together on the same hardware to cut down on overall equipment usage. Domain Server The domain server is used to authenticate users and computers included on the network. It is considered the main access control to a network because it stores all user account information used in authentication. Email Server The email server is used to direct messages to the correct recipient once the message has been processed by the server. Many companies today use a private internal mail system as a way of faster communication within departments. File Server A file server is used to provide users access to information and data across the network. This helps reduce file duplication across different computers on the network. Permissions can be set for file access so that important documentation can be read but not written to or deleted. DNS Server A DNS server is a kind of server that translates DNS names into an I. P address that is used for communication on the internet. DHCP Server A DHCP server is used by hosts to retrieve I. P addresses and other information. Firewall Server A firewall server is used for monitoring the network for vulnerabilities and intrusions and detecting viruses in the event of an attack from the internet. Application Server An application server is used to host applications and make them a part of the networkââ¬â¢s resources. The servers are commonly used to save on costs for multiple software licenses compared to a site license. Database Server A database server is used to host a database for access by users. These servers can be updated and viewed. These are commonly used in finance departments or companies that host customer records that needs to be accessed and amended constantly. Network Devices This section will better explain the other devices that make up a network such as the network equipment itself and other devices which can be considered essential to a networked environment. Modem A modem is used to connect an outside line (usually from an internet service provider) via telephone communication to the network enabling internet access or access to another siteââ¬â¢s resources. Router A router is a device that forwards data packets between devices on a network and can manage which network node receives certain data rather than sending the same data to each node. Routers can also have their own firewalls. Switch A switch is used to connect segments of a network together. Switches are an important part of a network as they are used to connect multiple devices at once. These switches come in all shapes and sizes, ranging from a simple 2 port switch to a 48 port switch which fits into a server rack. Wireless Access Point The wireless access point is a device that adds wireless connectivity to your network. This type of network device is often used to connect portable devices such as laptops, PDA and Smartphones to the network. It is also used for wireless printers and installing hardware devices to computers where network cabling is not applicable. Network Printer Network printers are printers made available on the network as a resource so that many users can print from one location. This cuts down multiple hardware usage per computer which saves hardware costs and maintenance. Aside from users, all of these services and devices are what make up a network. Connecting your Network: Cabling and Access Points Now that we have outlined what services and devices make up a network, there is the matter of how a network will be connected. There are a few methods of connecting a network, each with its own proââ¬â¢s and conââ¬â¢s. The standard method of connecting a network is via cable. Cable Connection Cable connection for a network is one of the most trusted methods of connecting users to resources. The reason for this being that wired connections were the first standard and constant communication to be used with computers. Wireless connection is still a fairly new method of communication and is therefore still changing. Types of Network Cables There are quite a few types of network cables that are used today in business, each suited for different purposes. Twisted Pair is a type of copper cabling that is used for telecommunications and most Ethernet networks. There are two types of twisted pair cabling. â⬠¢ Unshielded twisted pair (UTP) ââ¬â UTP cables have a range of 100 meters and rely solely on the cancellation effect produced by the twisted-wire pairs that limits signal degradation. â⬠¢ Shielded twisted pair (STP) ââ¬â STP cables reduce electrical noise from within the cable since each pair of wires is wrapped in metallic foil to better shield the wires from noise. Four pairs of wires are then wrapped in a metallic braid or foil. Coaxial cable is a copper-cored cable that is surrounded by heavy shielding. There are several types of coaxial cable. â⬠¢ Thicknet or 10BASE5 ââ¬â used in networks and operated at 10mbps, maximum length of 500 meters. â⬠¢ Thinnet or 10BASE2 ââ¬â used in networks and operated at 10mbps, maximum length of 185 meters. â⬠¢ RG-59 ââ¬â Most commonly used with cable television. â⬠¢ RG-6 ââ¬â Higher quality than RG-59, with more bandwidth and less susceptibility to interference. A fibre optic cable is either a glass or a plastic fibre that carries light along its length. Fibre optic cable can reach distances of several miles before the signal needs to be regenerated. Fibre optic is more expensive than copper cable and connectors are more expensive and harder to assemble than other connections. Wireless Connection Wireless technology is also a greatly utilised technology in business today even though the reliability of wireless connection does not compare to that of a cable connection. Security There are a few different ways to apply security in a network. Some security protocols may be placed during network design and some protocols when the network is running. Network security during the design During the designing of the network, avoid giving anyone outside the implementation team or network designer any information, such as work plans about the network design or the materials that will be used for the network, which will help Vandals infiltrate or use the network inappropriately. Basic security that should be present in a network 1. Firewall will offer a tougher barrier between the private network and the Internet. Firewalls will prevent unwanted users or hackers from accessing the network. 2. Proxy can be used to provide users a way to connect to the proxy server by requesting authentication from the security service during the exchange of files in the network. 3. Antivirus ââ¬â is used to prevent viruses from penetrating the network and the computers connected to it. It also eliminates the counter-espionage potential within a network. Since there are many antivirus softwares available, the network has the freedom to choose the appropriate antivirus for the network. 4. Strong password encourages all network anà web users to use a password that contains letters, numbers and symbols so as to increase the difficulty of breaking or cracking the password and steal any information from the network. 5. Packaging ââ¬â cables used to make sure no unauthorized person have access to data and change it. Disaster Planning and Recovery Before setting a network, the manager of the project requires designers and developers of the network to take into account unforeseen circumstances, such as natural disasters and hardware failure, to reduce their impact. Earthquakes, floods, fires and such disasters may be given a solution using the following points â⬠¢ The proximity of cables to main electrical wirings must be significantly distant to avoid fire. â⬠¢ As much as possible, servers must be placed outside the building. Extra security protocols must be applied to avoid losing information. â⬠¢ If a building has multiple servers, it is advised that all servers be placed on an isolated location and away from public gathering places. This will require the development of additional security precautions. â⬠¢ Different types of cables should be considered in setting up a network to maximize its us â⬠¢ Do not put cables near bodies of water or water discharge sa this may damage the cables â⬠¢ Provide rooms with electric generators in case a power outage occurs. Make sure that these rooms are close to their central control devices to avoid technical problems in connecting the machines to the generator. â⬠¢ Provide fire-preventing equipment such as fire extinguishers near the whereabouts of control systems â⬠¢ Provide water and fire alarms to inform personnel if water or fire gets near the data storage devices â⬠¢ The network team should provide a spare or backup server to perform full back up planning after disaster With the increase in number of intrusions and attacks on networks trying to take data and information, a way of protecting these data should be prioritized in a network. Since the data are, most of the time, secret and important to companies, detection and control of intrusions must be strictly implemented. Through the latest presentations that we have done in class, we have learned new techniques and OSI Models that should be taken into account to provide the highest standards of security and quality. Some of these techniques are firewalls, proxies, encryptions, IP security, data authenticity, communications type and satellites.
Wednesday, August 21, 2019
Christina Rossetti Essay Example for Free
Christina Rossetti Essay â⬠¢ Christina Rossetti was the youngest of four children â⬠¢ Mother- Gabriele Rossetti, an Italian patriot who came to London in 1824. â⬠¢ She had one sister, Maria, and two brothers, Dante Gabriel and William. â⬠¢ Brought up as devout Anglo-Catholics. Christinas elder sister Maria eventually became an Anglican nun. â⬠¢ In 1848 she became engaged to James Collinson, a member of her brothers Pre-Raphaelite circle. (broke it off when he became a Roman Catholic. â⬠¢ Next she fell in love with Charles Cayley ( she broke it off because of religious differences. â⬠¢ Her brother William said: She enquired into his creed and found he was not a Christian. Rossettis definition of Christianity was narrower and more evangelical than most peoples. â⬠¢ Like many unmarried middle-class women of that period, Rossetti did not have any paid employment, except for about a year when she and her mother tried to run a day school after failing health and eyesight forced her father to retire in 1853. â⬠¢ Christina Rossettis family was very important to her. Although she loved two different men, and it is clear from her poetry that she could express feelings of love and the heartbreak of losing love, she never married or broke away from home. Her brothers and sister were central to her emotions and she was deeply upset by Dante Gabriels nervous breakdown in 1872. â⬠¢ He died in 1882; she lived as a recluse at home, concentrating on her religious life. â⬠¢ After a period of ill health Christina Rossetti died of cancer on 29 December 1894. Her Poetry â⬠¢ Poetry inspired by her religion. â⬠¢ Many poems, such as When I am Dead, My Dearest, Remember and Up-Hill, are concerned with the nearness of death and the renunciation of earthly love. â⬠¢ Her love of God is passionately expressed in Long Barren, and her poem In the Bleak Mid- Winter is well known as a Christmas carol. â⬠¢ Also a poet who demonstrates in her work, a love of nature. Another Spring and Spring Quiet show an exactness of observation which her Pre-Raphaelite brothers would have undoubtedly appreciated. â⬠¢ Her poem A Birthday is a rapturous expression of delight in love. â⬠¢ She also shows a malicious appreciation of sisterly jealousies in her poem Two Noble Sisters. â⬠¢ Among her works is Sing-Song, A Nursery Rhyme Book, published in 1872, which contains lyrics for young children. â⬠¢ Many people consider that her best work is Goblin Market (1862), the longest of her poems. Because goblins sound as if they belong in a fairy story, it is often put in collections for young children. However, it is really a short epic poem for adults. â⬠¢ The most obvious quality of the writing is the exactness and sensuousness of her descriptions of the fruit sold by the goblins. Comparisons to Other poets â⬠¢ The nearest comparison in English poetry to this must be the description of the feast in Keats The Eve of St Agnes. The most striking thing about the subject matter is its eeriness. â⬠¢ Some people have seen this poem as an allegory, in which the fruits offered by the goblins stand for the pleasures of the world, though according to Christinas brother William she denied that it was anything more than a fairy story. â⬠¢ However, many modern readers may make a connection with the temptations and effects of narcotic drugs. â⬠¢ This may not be a connection that Rossetti intended, but the description of Laura yielding to temptation and her subsequent illness would have been familiar to such families as the Brontà «s, whose brother Branwell died of an addiction to drink and drugs, and to Coleridge, who suffered from a lifelong addiction to opium.
Implementation of Wireless Receiver Algorithms
Implementation of Wireless Receiver Algorithms Figure 1 System Specifications (Tsimenidis, 2016) Figure 2 Message format (Tsimenidis, 2016) Figure 3 Non-coherent receiver (Tsimenidis, 2016) Figure 4 Coherent receiver (Tsimenidis, 2016) Figure 5 Receiver Front-End (Tsimenidis, 2016) Figure 6 Frequency response of a passband filter (Tsimenidis, 2016) Figure 7 Band-pass filter response Figure 8 Band-pass filter input/output Figure 9 Implemented DPSK demodulator (Tsimenidis, 2016) Figure 10 Low-pass filter input/output Figure 11 Optima sample time diagram Figure 12 Symbol with 40 samples (Tsimenidis, 2016) Figure 13 Early-Late sample at an arbitrary point (Tsimenidis, 2016) Figure 14 Early-Late sample at the maximum point of power (Tsimenidis, 2016) Figure 15 Early-Late symbol synchronization input/output Figure 16 Result of non-coherent receiver detection Figure 17 IQ Downconverter (Tsimenidis, 2016) Figure 18 Sine and cosine table graphs Figure 19 Index control flow (Tsimenidis, 2016) Figure 20 Filter comparison (Tsimenidis, 2016) Figure 21 Down-conversion: x3I vs. x3Q counter clockwise Figure 22 Down-conversion: x4I vs. x4Q counter clockwise Figure 23 x6I vs. x6Q Figure 24 Averaging approach to overcome the jitter (Tsimenidis, 2016) Figure 25 Code to solve the jitter Figure 26 Principle of the differential detector (Tsimenidis, 2016) Figure 27 Constellation without Phase Offset (dI Vs dQ) Figure 28 Result of coherent receiver detection using differential coherent demodulator Figure 29 BPSK and DPSK BER comparison (Tsimenidis, 2016) Figure 30 Costas Loop algorithm (Tsimenidis, 2016) Figure 31 Costas loop: yQ vs. yI Figure 32 Message obtained using Costas loop Figure 33 BER comparison of different modulation schemes and techniques (Sklar, 1983) This project is focused on implementing and coupling several functional blocks that will allow us to detect, extract and decode a wireless message that is being broadcasted in the Merz lab of computers. In the following sections, we will find the implementations of coherent and non-coherent receivers. In the section 1 we define the basic background knowledge that will be commonly used in the posterior phases of the report. We define the basic structure and features of the transmitter as well as the message format that the system is intended to detect. Finally, we define what is a coherent and a non-coherent system and provide a classification about the different techniques. In the section 2 we will analyse the non-coherent receiver implementation from the message acquisition, going to the filter section, signal scaling and refinement, using a DPSK demodulator to define the probable symbols represented, then establishing a synchronization for the symbol and finally presenting the message obtained. The section 3 will focus in the realization of a coherent receiver, considering two possible variations on this type of implementation: the first will be developed using a differential coherent demodulator, in this technique we will not recover the carrier signal. The second implementation of this receiver, will be done using a carrier recovery technique, which is in this case a Costas Loop Algorithm. Some common blocks are done in all the possible implementations that were carried out during this project: the first is the receiver front-end which is the responsible to acquire and prepare the signal for the posterior processing. To recover the symbol synchronization, we use a technique called early-late gate, this will let us know what is the most convenient instant of the time to sample the signal. For the case of coherent signal, we must adapt this technique to apply it separately for the signal I (in-phase) and Q (quadrature). The section 4 contains analysis, conclusions and discussions of the results obtained during the realization of the phases. The last sections of the report detail the references used for further explanations and the different programs used for implementing each block. In each section, we include little further explanations that could be referred to understand the steps and details that have been done in the corresponding section. 1. Background knowledge 1.1. Aims and objectives The focus of this project is to demonstrate the implementation and the behaviour of data links using Radio Frequency as media and different techniques. Basically, we use two techniques: coherent and non-coherent implementations. A further explanation of these techniques will be done in the following sections. A second implementation of a coherent receiver will be carried out by using a phase recovery technique with the Costas Loop and coupling the posterior phase to this block. The specifications of the system to be implemented could be defined as a set of blocks connected as follows: Figure 1 System Specifications (Tsimenidis, 2016) Where the transmitter has been already implemented, therefore the work will be carried out in the receiver algorithm to obtain the final data, which of course must be in a human readable format. We also must consider that the format of the message that is being broadcasted wirelessly in the Merz lab has the following format: Figure 2 Message format (Tsimenidis, 2016) 1.2. Digital modulation The digital modulation process refers to a technique in which the digital representation of the information is embedded in a signal, a carrier typically a sinusoidal signal, in such a way that this information will modify an established parameter of the signal. We can define a sinusoidal carrier in a general way as a signal that will correspond to the equation: Where the information could be embedded in this will be called amplitude modulation, if the parameter this will be called frequency modulation and finally the phase modulation will be obtained if we embed the data in the expression. Regard to the symbol this is called the angular frequency, it is measured in radians per second, this is related to the frequency (f) expressed in Hertz by the expression. 1.3. Coherent and non-coherent detection Considering the receiver side, we can classify the demodulation or detection based on the use of the carriers phase information in the process of information recovery. In the case that the receiver uses this information to detect the signals it will be called coherent detection, and non-coherent detection otherwise. This are also called synchronous and asynchronous detection, respectively. Coherent Non-Coherent Phase Shift Keying (PSK) Diferential Phase Shift Keying (DPSK) Frecuency Shift Keying (FSK) Frecuency Shift Keying (FSK) Amplitude Shift Keying (ASK) Amplitude Shift Keying (ASK) Continuous Phase Modulation (CPM) Continuous Phase Modulation (CPM) Figure 3 Non-coherent receiver (Tsimenidis, 2016) Figure 4 Coherent receiver (Tsimenidis, 2016) 2. Non-coherent receiver 2.1. Receiver Front-End This segment of the non-coherent receiver will consist of the first two blocks, which are common for both coherent and non-coherent implementations. Figure 5 Receiver Front-End (Tsimenidis, 2016) The first block is the responsible to take a sampled input expressed as bits, represent it as a float number and then normalise it to a range +/- 1.0. The second stage applies a bandpass filter to the signal, this will attenuate the parasites components of frequency that could contaminate the signal that we received. Figure 6 Frequency response of a passband filter (Tsimenidis, 2016) To design the passband filter we must consider the following information: let = 4800 Hz, data rate = 2400 bps and sampling frequency = 48000 Hz. These assumptions, led us to the following results: Lower passband cut-off frequency: = = 3600 Hz Upper passband cut-off frequency: = + = 6000 Hz Lower stopband cut-off frequency: = = 1200 Hz Upper stopband cut-off frequency: = + = 8400 Hz The implementation of the filter will be done using the sptool command of Matlab, using the above defined values as parameters for the filter. The following figure shows the result obtained in the realization of the lab, considering the number of filter coefficients of 101. Figure 7 Band-pass filter response Figure 8 Band-pass filter input/output 2.2. DPSK demodulator To implement the non-coherent detection, we are going to use a DPSK demodulator, which was previously categorized as a non-coherent technique. The DPSK demodulator will take advantage of two basic operation that occur on the transmitter: the first is the differential encoding, and the second is the phase-shift keying. In the transmitter, the signal will be advanced in phase, with respect to the current signal, if the symbol to be sent is 0, and the phase will be preserved if the bit corresponds to 1. In the side of the receiver, we have memory that will be able to compare the phase of two successive bit intervals, i.e. it determines the relative difference in phase of these two, determining the correspondent symbols without the need of having information about the phase of the signal in the transmitter. Figure 9 Implemented DPSK demodulator (Tsimenidis, 2016) The FIR matched filter block will correspond to a low-pass filter, this is required because the demodulation process, as it is a multiplication between two sinusoidal signals, will generate a low-band signal and a high-band signal, where the second one should be filtered. 2.3. Symbol synchronisation The symbol synchronisation, also called symbol timing, is a critical process that consists in the continuous estimation and update of information of the symbol related to its data transition epochs. This is a critical process that must be conducted to keep the communication accuracy in acceptable levels. Broadly speaking, the synchronization techniques could be classified in two groups: open-loop and closed-loop. The chosen technique for this project corresponds to the Early-Late Symbol Synchronization which is a closed-loop type. The most popular technique is the closed-loop synchronization because Open-loop synchronizer has an unavoidable nonzero average tracking error (though small for large SNR, it cannot be made zero), a closed-loop symbol synchronizer circumvents this problem.(Nguyen Shwedyk, 2009) The corresponding results of the output of the demodulator are the following figures, these corresponds to the signals before and after the signal is filtered with the FIR low-pass filter. Notes: The curve in blue corresponds to the signal containing the high-frequency parasite component, and the curve in red shows the result of filtering the high frequency component, i.e. this is the output signal of the filter. The symbol correspondence is: symbol 0 for positive numbers, and symbol 1 for negative magnitudes. Figure 10 Low-pass filter input/output 2.3.1. Early-late Symbol Synchronization (Reed, 2002) The algorithm Early-late used for synchronization is supported by the idea that the sample of a symbol must be taken in the time where the energy is maximum, this will warranty a minimum error probability. This algorithm exploits the symmetry of the signal, neglecting the distortion and noise. Considering the following figure, we can see that the optimal time to take the sample, identified as T, should be in the halfway between two points T0 + d and T0 d, if the power in the T0 + d and T0 d is, ideally, the same. Figure 11 Optima sample time diagram Suppose the following figure shows a symbol, we can notice that if we take an arbitrary sample, e.g. n=3 and depending on the thresholds, could be wrongly interpreted as 0, however the most appropriated value is 1. Figure 12 Symbol with 40 samples (Tsimenidis, 2016) With a buffer size of 20 registers, we can notice that in the following figure the power levels of the signal for n=0 and n=19 are different, then we need to move the whole buffer one space to the right. Figure 13 Early-Late sample at an arbitrary point (Tsimenidis, 2016) If we continue with the iteration and we follow the rules described in the flow diagram, we will converge in a finite number of iterations, where we can see that the result is located as expected, this could be seen in the following figure. Figure 14 Early-Late sample at the maximum point of power (Tsimenidis, 2016) The results of the application of this algorithm for our case are shown in the following figure: Note: The signal in red is the input of the early-late symbol synchronization block and the signal in blue is the value of Em that will finally determine the value that the symbol is representing, in each case. Figure 15 Early-Late symbol synchronization input/output 2.4. Frame synchronisation As was stated in the in the background section, the message frame will begin with the characters ++++ and the message has 72 bytes encoding the message using a ASCII characters. Therefore, this section will deal with two tasks: (1) Detect the message preamble and (2) Decode byte per byte of the data contained in the payload. After the preamble section, we will detect 576 bits, corresponding to the 72 bytes that correspond to the ASCII characters. These characters will be dumped into an executable file that will then show the message that has been detected and decoded. The specific implementation of the algorithm is attached in the appendix section of this report. 2.5. Results and evaluation The result of applying the steps described in the sections from 2.1 to 2.4, we obtain the message, getting the result showed in the next figure: Figure 16 Result of non-coherent receiver detection 3. Coherent receiver The coherent receiver, also called synchronous receiver, implies certain degree of agreement or knowledge about parameters used in the transmitter side. For the case of the project, we have a signal of type DPSK, i.e. the codification is contained in the variation of the phase of the signal. 3.1. IQ Down-converter The aim of this component is to decompose a complex signal in terms of its in-phase and quadrature elements. To achieve this decomposition, we are going to perform the implementation using lookup-table oscillators, i.e. that for a given signal in-phase and quadrature components will be obtained by using the definitions given by: Figure 17 IQ Downconverter (Tsimenidis, 2016) Upon these definitions, the components that we obtain could be represented in two separated graphs, each one of them representing a different component table. Figure 18 Sine and cosine table graphs As for the index control of look-up table, we decide to use for loop to generate x2I[n] and x2Q[n], storing and transporting data to corresponding files as x2I.h and x2Q.h. These files will be used later to perform the conversion of values. Figure 19 Index control flow (Tsimenidis, 2016) After understanding the principle, we defined all of variables and initialized them to zero inside the main, and select the appropriate value of some variables such as state_mf, coeffs_mf and N_mf.Same as the picture over, the original data from bandpass output is also separated into two filters: Matched Filter I and Matched Filter Q, and the coefficients of the filters are the same with the original one. The benefit of using the lookup-table oscillators (setting x2 into x2I and x2Q) is to decrease the time of simulation because of the lower required sampling rate.Ãâà We can use via lookup table method to call them from x2I.h and x2Q.h, so that we can use it more efficiently in Matlab instead of shifting itself. And then, we multiplied x1 to x2I[n] and x2Q[n] one by one by using another for loop and got x3I and x3Q.Besides,the code of matched filter had been given by tutors and got x4I and x4Q. {x4I=fir(x3I,coeff_mf,state_mf_I,N_mf);Ãâà //match filter I } {x4Q=fir(x3I,coeff_mf,state_mf_Q,N_mf);Ãâà //match filter I } Figure 20 Filter comparison (Tsimenidis, 2016) We monitored and recorded x3I and x3Q in PicoScope and print screen. The wave of them spinning fixed at the origin point so three of these blows were selected to describe this wave batter. Figure 21 Down-conversion: x3I vs. x3Q counter clockwise After this, we can visualize the outputs of each one of the filters, now we are going to plot in the figure x4I and x4Q, obtaining: Figure 22 Down-conversion: x4I vs. x4Q counter clockwise 3.2. Symbol synchronization After IQ down-converter, the next stage is symbol synchronization. To achieve this, we create x5I[n] and x5Q[n] and sent x4I, x4Q one sample at the time. The procedure that we should do in this section is similar to the one seen in the non-coherent detection, however we must consider two buffers instead of one, one for I and other for Q parts. The sum of the above established energies will correspond to the energy that can be seen as the total energy of the signal, which is similar to lab of the symbol synchronization for the non-coherent receiver. The corresponding calculations to obtain the signals after the symbol synchronization process are defined as: Then, plotting the results obtained, we see the following figure: Figure 23 x6I vs. x6Q Due to synchronization problems, we threated the jitter that was causing these inconsistences using the averaging approach, as described in the follows: Figure 24 Averaging approach to overcome the jitter (Tsimenidis, 2016) Figure 25 Code to solve the jitter 3.3. Differential coherent demodulator In this section, we will implement a differential detector, also called a differential coherent demodulator. Figure 26 Principle of the differential detector (Tsimenidis, 2016) At first, we declare and initialize appropriately the required variables and define .In this differential detector, need to multiply ,1 symbol delay by . N N=1 N=2 N=3 After this, we defined x6I_prev and x6Q_prev to deal with this problem and let x6I_prev and x6Q_prev denote the values of x6I and x6Q from the previous symbol. It is very important to initialize them to zero at the declaration because we know . (Tsimenidis, 2016) x6I_prev=x6I; x6Q_prev=x6Q On the same time, dI contains the first two terms which stand for the In-phase part and dQ which contains the last two terms which stand for the Quadrature part. Hard decision is then achieved by deciding whether the dI value is positive or negative, with a negative value indicating that a logic 1 was transmitted which might be used in the next step that is frame synchronization and message detection. Now we obtain the plot showi
Tuesday, August 20, 2019
My term paper :: essays research papers
à à à à à What Came first the chicken or the egg? For centuries man has struggled with the question of our origin. Why are there so many distinctions in the creatures that inhabit this planet. Why are structures similar in a bird, a whale, a bat, and a human being creatures that seem to have no relation to one another. Although several theories have sprouted from different great thinkers of many cultures in many diverse parts of the world all of the theories seem to center around two main points divinity vs chance or for a more famous colloquialism Evolution Vs Creation. Once complete this paper should allow the reader to see not only the folly and boldness of evolution in the face of so many discrepancies, but also the sheer irrefutable beauty of creation in all of its complex simplicity à à à à à In the beginning God Created the heavens and the earth. Now the earth was formless and empty, Darkness was over the surface of the deep, and the Spirit of God was hovering over the waters. And God said ââ¬Å"Let there be lightâ⬠and there was light Genesis 1:1-3 NIVà à à à à à à à à à The bible, one of the oldest pieces of written history that follows an entire civilization for over 4000 years not only gives fascinating tales of mystery, intrigue, wars, famines, loves and loses also gives a very specific account of the origin of man and indeed all life on this planet as well as in the universe. The simplicity of the verses tells us that the big bang was possible, with divine help, it gives no more than God said it and it was so which would agree with the abrupt abitrary eruption of the solar system that scientist describe. This insight allows us to delve even deeper into the awesome power of Gods word. Here in the beginning we see how just the word can form solar system, delving even deeper we catch a glimpse of what that means for us as human beings and our origin. à à à à à Classical evolutionary theory teaches that creatures change from one thing into another. For instance, amoebas changes from one celled creatures to multi celled creatures over time. Genesis in the first chapter tells us that things must reproduce ââ¬Å"each according to its kindâ⬠. Recorded history and fossil records should support one of the theories. Evolutionist claim that it supports theirs however noted paleotologist have even noticed the apparent gaps in the record showing that there is a missing link.
Monday, August 19, 2019
Beethoven, Bach And Bartok: Comparisons Essay -- essays research paper
Barouque Composers Still Being Played Frequently Monteverdi Lully Corelli Pachelbel Scarlatti Purcell Couperin Albinoni Vivaldi Telemann Rameau Bach Handel Gluck Baroque and Classical Orchestras ââ¬â Differences <td width="50%">Baroque OrchestrasClassical OrchestrasString section and basso continuo central to the orchestra. Other instruments are occasional additions.Standard group of four sections: strings, woodwinds, brass and percussion. Different instruments treated individually.Fairly small; generally 10- 40 players.Larger than baroque; great variation to the numbers of players.Flexible use of timbres, e.g. Timpani and trumpets used generally just for festive music.Standardised sections. Most sections used regularly.Tone colour is distinctly secondary to other musical elements.Greater variety of tone colour and more rapid changes of colour. Timbre is unimportant and therefore a piece written for harpsichord could easily be rearranged for a string section.Each section of the classical orchestra has a special role. And each instrument is used distinctively.Wind instruments mainly used as solo instruments or as part of the basso continuo.The wind section had become a separat e unit capable of contrast and distinct colour.The harpsichord generally plays an ostinato under the orchestra. Piano not invented.The piano introduces a third colour-tone to be contrasted with the orchestra Baroque and Classical Concerto Formââ¬â Differences <td width="50%">Baroque Concerto FormClassical Concerto Form Concerto grosso (use of string orchestra set against a number of solo instruments) is the most popular concerto form of this period. Other forms include The ripieno concerto and the solo concerto.Symphony form develops from baroque concerto forms and becomes the new form. Shorter movements than classical form.Concerto longer than baroque from. Fairly strict structure and prerequisites, e.g. Traditional ritornello form, virtuostic displays etc.More freedom and experimentation with traditional form. First movement has solo passages extending into long sections; alternated between four or five ritornello sections. First movement constructed in a variant of ritornello form with a double exposition. Violin is preferred concerto solo instrument although the harpsichord becomes more and more popular throughout the century.The newly prominent piano tak... ...and Bartók used instruments for solo passages that had not been used again. All demanded high performance levels from their orchestra. Both Mozart and Bartók wrote string quartets. All had great influence on later composers, Mozart on Beethoven, Bartók on Copeland and Bach on everyone including his twenty or so children All were leaders in their own eras. All died tragically, all succumbing to illness. Bibliography TitleAuthor/ EditorPublisherDate James Galwaysââ¬â¢ Music in TimeWilliam MannMichael Beazley Publishers1982 The Concise Oxford History of MusicGerald AbrahamOxford University Press1979 Music in Western CivilizationPaul Henry LangW. W. Norton and Company1941 The Ultimate Encyclopaedia of Classical MusicRobert AinsleyCarlton Books Limited1995 The Cambridge Music GuideStanley SadieCambridge University Press1985 School text: Western European Orchestral MusicMary AllenHamilton Girlsââ¬â¢ High School1999 History of MusicRoy BennettCambridge University Press1982 Classical Music for DummiesDavid PogueIDG Books Worldwide,Inc1997 Assignment Completed By: Wolff, © June 2000 A: Yr 12 Musical Knowledge Research Assignment 24/05/00/Joan
Sunday, August 18, 2019
Biomechanics of Running Essay -- essays research papers
Introduction: A Qualitative Analysis of Running In the 1970's, thousands of people took to the road with a new trend of exercise----running. It was fairly easy; just put one foot in front of the other as fast as you can and go as far as you can. Feel the burn in your chest? The sweat trickling down your face? The throb in your knees as your foot pounds into the ground with every step? Well then, you're exercising! Youââ¬â¢re running! Since then, running has become a dominant factor in sports and fitness; a factor so prevalent that the number of musculoskeletal injuries due to running has also increased over the last quarter century. These chronic injuries are usually due to overuse, improper training techniques, or a combination of the two. By using the results of other biomechanistsââ¬â¢ studies, one can extrapolate an idea of what running should look like and what muscles are utilized during the activity. Consequently, changes in technique, strength training, and flexibility training can be made in order to decrease the po tential for injury. Article Summaries à à à à à Before analyzing the mechanics of running, it is important to accumulate some of the vast research available for this activity. The following are brief summaries of research articles that study various factors on running. DeVita (1994) noted the gait cycle is measured in two ways: swing-stance-swing or stance-swing-stance. In this study, EMG activity of six muscles was obtained from four subjects while walking and running. The data was collected while the subjects performed a consecutive swing, stance, swing period of each gait. From this, the swing-to-stance and stance-to-swing period of each gait could be measured. The EMG results showed greater activation levels for 5/6 muscles during the swing-to-stance period. Results concluded that the subjects needed to prepare for the initiation of stance and the application of relatively large external forces and momentums. Therefore, when assessing the human gait, it is best to observe stance-swing-stance. Jacobs, Bobbert, VanIngen, and Schenau (1993) analyzed the function of mono- and biarticular leg muscles during the stretch-shortening cycle of running at 6 m/s. Kinematics, ground reaction forces and EMG activities were recorded for a single stance phase. First of all, estimates of muscle force were correlated with origin... ... Reference Page DeVita, P. (1994). The selection of a standard convention for analyzing gait data based on the analysis of relevant biomechanical factors, Journal of Biomechanics (vol 27, no 4) pg. 501-507. Hall, S.J. (1999). Basic Biomechanics (3rd ed), pg. 398-439. McGraw-Hill. Jacobs, R., Bobbert, M.F., vanIngen Schenau, G.J. (1993). Function of mono- and biarticular muscles in running, Medicine and Science in Sports and Exercise (vol 25, no 10) pg. 1163-1173. National Strength and Conditioning Association, Baechle, T.R., editor (1994). Essentials of Strength Training and Conditioning pg. 293-385. Human Kinetics: New Zealand. Nig, B., DeBoer, R., and Fisher, V. (1995). A kinematic comparison of overground and treadmill running, Medicine and Science in Sports and Exercise (vol 27, no 1) pg. 98-105. Northrip, J.W., Logan, G.A., and Wayne, C.M. (1979). Introduction to Biomechanical Analysis of Sports (2nd ed), pg. 45. W. C. Brown Co. Publishers: Dubuque, IA. Rasch P.J. and Burke, R.E. (1978). Kinesiology and Applied Anatomy (6th ed) pg. 199-398. Lea & Febiger: Philadelphia Thordarson, D.B. (1997). Running Biomechanics, Clinics in Sports Medicine (vol 16, no 2) pg. 239-247.
Subscribe to:
Posts (Atom)